RED GO CART BUILDING INSTRUCTIONS

Image above shows the finished GO CART brick model.

Below is a shot of the parts in the RED GO CART custom building kit.

PARTS LIST
2 red 1x3 33-degree slopes
1 red 2x2 seat/chair
1 red 1x2x4 angle plate
1 dark gray 1x2 grill
2 yellow amber caps1 red 2x8 plate
1 black & white steering wheel
3 white 1x2 smooth tiles
2 gray 2x2 plates with axel pegs4 black tires on 4 gray rims


Step 1
Attach the tires and rims to the gray 2x2 axel plates. Place 1 white 1x2 smooth tile on the top pegs of the red 1x2x4 angle plate. Attach the 2 yellow amber caps and dark gray grill.


Step 2
Place the 2 red 1x3 slopes on the red 2x8 plate as shown. Add the steering wheel and a white smooth tile at the end of the red 2x8 plate.


Step 3
Place the red 2x2 seat on the remaining 4 pegs of the red 2x8 plate, between the steering wheel and the white tile. Add the remaining white tile to the pegs on the slopes.


Step 4
Place the red 1x2x4 angle plate assembly on the remaining two pegs of thered 2x8 plate at the front of the GO CART.

Step 5
Add the 2 gray 2x2 axel plates with rims/tires to the underside of the red 2x8 plateat the front edge and the back edge. You’re ready to roll!