PASTEL PINK & MAGENTA CAR KIT • BUILDING INSTRUCTIONS

Above: The PASTEL PINK & MAGENTA CONVERTIBLE CAR kit shown assembled with female minifigure ROSA!

PASTEL PINK & MAGENTA CAR KIT • BUILDING INSTRUCTIONS

This area will be available soon.

RED CONVERTIBLE CAR KIT • BUILDING INSTRUCTIONS

Above: The BRICK TRICK DUDE RED CONVERTIBLE CAR kit shown assembled.

RED CONVERTIBLE CAR KIT • BUILDING INSTRUCTIONS

This area will be available soon.

POWDER BLUE CAR with SANDRA • Building Instructions

Above: The POWDER BLUE CONVERTIBLE CAR custom building kit from BRICK TRICK DUDE shown assembled.

POWDER BLUE CAR with SANDRA • Building Instructions

Images and directions will post here soon.

PINK FOUR WHEELER • BUILDING INSTRUCTIONS

Above: The PINK FOUR WHEELER shown assembled complete with female minifigure ZELDA.

PINK FOUR WHEELER • BUILDING INSTRUCTIONS

Another in the series of BRICK TRICK DUDE custom building kits, fans of PINK will dig the PINK FOUR WHEELER and GAL PAL ZELDA. Following is a parts list as well as images and directions for building this kit, sold exclusively on Ebay. You can also use your own bricks and parts.

REMINDER: Enlarge the images by simply clicking on them.

Below: The PINK FOUR WHEELER from the rear view.

Below: Parts contained in the BRICK TRICK DUDE custom building kit.

PARTS LIST
2 red transparent 1x1x2/3 slopes
2 yellow transparent 1x1x2/3 slopes
1 white 1x2 smooth tile
1 dark purple 1x2 grill
2 dark pink 1x2x1x4 angle plates
4 dark gray 2x2 mudguard plates
4 large tread wide black tires on wide white rims
2 black 2x2 axle plates
4 dark pink 1x2 45-degree slopes
1 light gray 1x2 printed tile
1 white 1x2 tile w/panel
3 black 2x2 plates
1 black 1x2 tile w/handle
2 black 1x1 plates w/grabber
2 neon transparent 1x1 cones
1 black/white steering wheel
1 white 2x8 plate

Step 1: Place wheels on black axle plates. Add red transparent 1x1 slopes and white tile to dark pink angle plate; add yellow transparent slopes and grill to second dark pink angle plate. Put neon cones on black 1x1 plates.

Step 2: Place 3 black 2x2 plates on white 2x8 plate. Add dark pink 1x2 slopes to 2 dark gray mudguards. Add light gray printed tile to slopes as shown. Add dark pink angle plates to white 2x2 plate.

Step 3: Place dark gray mudguards on “chassis” as shown. Using the grabber, add black 1x1 plates with neon cones to black 1x2 tile with handle to form “fog lights”.

Step 4: Add steering wheel and white 1x2 tile w/panel to mudguards. Place fog lights on rear set of dark pink slopes. Add wheel assemblies to underside of white 2x8 plate.

Step 5: Add your minifigure driver and you’re ready to roll!

ORANGE CONVERTIBLE CAR KIT • BUILDING INSTRUCTIONS

Above: The ORANGE CONVERTIBLE CAR KIT shown assembled with female minifigure driver "Dani".

ORANGE CONVERTIBLE CAR KIT • BUILDING INSTRUCTIONS

This posting features images and building directions for the BRICK TRICK DUDE original custom building kit sold as the ORANGE CONVERTIBLE CAR kit on Ebay.

Below: The ORANGE CONVERTIBLE CAR shown from the rear view.

Below: Parts included in the BRICK TRICK DUDE custom building kit for this project.

PARTS LIST
1 red 2x8 plate
1 white 1x2 smooth tile
2 red trans. 1x1x2/3 slopes
2 red trans. 1x1 cones
2 yellow trans. 1x1 caps
2 orange 1x2 45-degree slopes
1 dark gray 1x2 grill
1 black/white steering wheel
2 red 2x2 smooth tiles
2 orange 1x1 caps
4 orange 1x2 grills
2 red 1x4x2 angle plates
2 orange 1x1 bricks
1 black 2x2 plate
1 orange 2x2 brick
1 clear 1x4x2 windshield
2 light gray 2x2 axle plates
4 black tires on 4 gray rims
4 clear trans. 1x2 plates
3 black 2x4 plates
4 orange 1x4 arch bricks

REMINDER: Enlarge the images simply by clicking on them.


Step 1: Place red transparent 1x1 cones as taillights on one of the red 1x4x2 angle plates and add white 1x2 smooth tile to indicate the license plate; this creates the rear bumper. Place yellow transparent 1x2 caps as headlights on remaining red 1x4x2 angle plate and add dark gray grill to indicate radiator; this builds the front bumper. Add red transparent 1x1x2/3 slopes to orange 1x2 45-degree slopes; this creates the rear taillight “fins”. Snap orange 1x1 caps to pegs on top of the clear 1x4x2 windshield. Assemble clear transparent 1x2 plates into two stacks of two plates each.

Step 2: Begin chassis assembly by placing black 2x4 plates and light gray 2x2 axle plates on the red 2x8 plate as shown.

Notes: Image above shows the car chassis from the underside, as it will look following assembly directions in Step 2.

Step 3: Add orange 2x2 brick, steering wheel, black 2x2 plate and the 2 orange 1x1 bricks to topside of chassis as shown.

Step 4: Add stacks of 2 clear 1x2 plates to headlight and taillight bumper assemblies. Place bumpers on chassis at front and back as shown.

Step 5: Attach orange 1x4 arch bricks to form fenders.

Step 6: Add windshield. Place the orange and red transparent slope “fins” on car as shown.

Step 7: Add red 2x2 smooth tiles and orange 1x2 grills to finish the car “body”.

Step 8: Carefully add the wheel assemblies to the four stud pegs on both 2x2 light gray axle plates and you’re ready to roll!


Notes: Change the look of your car by simply replacing the orange arch bricks and other parts with your own colors.

Above: Finished convertible car model along with minifigure driver, GAL PAL Dani.

RED ALL TERRAIN VEHICLE • BUILDING INSTRUCTIONS

RED ALL TERRAIN VEHICLE • BUILDING INSTRUCTIONS

This area will be available shortly.

BRITTANY and her HOT PINK CONVERTIBLE

Above: A female minfigure named Brittany drives this sporty HOT PINK CONVERTIBLE designed by BRICK TRICK artists Philip and Mitch.

Greetings BRICK TRICK BLOG Friends!

We've been working on various cars here in the studio and Mitch came up with this version with some input from Philip during the design and building session. Mitch uses dark pink 1x4 arch bricks to create the car "fenders" which conveniently fit right around these chunky tires. Directions to build this model will follow in a separate posting and you can use your own bricks or purchase a kit from BRICK TRICK DUDE on Ebay to create an exact replica.

Below: The HOT PINK CONVERTIBLE from the rear view shows off the "torpedo" tail lights created using red transparent cones. The "fins" are built using dark pink slopes topped of with white 1x1 slope bricks.