PINK FOUR WHEELER • BUILDING INSTRUCTIONS

Above: The PINK FOUR WHEELER shown assembled complete with female minifigure ZELDA.

PINK FOUR WHEELER • BUILDING INSTRUCTIONS

Another in the series of BRICK TRICK DUDE custom building kits, fans of PINK will dig the PINK FOUR WHEELER and GAL PAL ZELDA. Following is a parts list as well as images and directions for building this kit, sold exclusively on Ebay. You can also use your own bricks and parts.

REMINDER: Enlarge the images by simply clicking on them.

Below: The PINK FOUR WHEELER from the rear view.

Below: Parts contained in the BRICK TRICK DUDE custom building kit.

PARTS LIST
2 red transparent 1x1x2/3 slopes
2 yellow transparent 1x1x2/3 slopes
1 white 1x2 smooth tile
1 dark purple 1x2 grill
2 dark pink 1x2x1x4 angle plates
4 dark gray 2x2 mudguard plates
4 large tread wide black tires on wide white rims
2 black 2x2 axle plates
4 dark pink 1x2 45-degree slopes
1 light gray 1x2 printed tile
1 white 1x2 tile w/panel
3 black 2x2 plates
1 black 1x2 tile w/handle
2 black 1x1 plates w/grabber
2 neon transparent 1x1 cones
1 black/white steering wheel
1 white 2x8 plate

Step 1: Place wheels on black axle plates. Add red transparent 1x1 slopes and white tile to dark pink angle plate; add yellow transparent slopes and grill to second dark pink angle plate. Put neon cones on black 1x1 plates.

Step 2: Place 3 black 2x2 plates on white 2x8 plate. Add dark pink 1x2 slopes to 2 dark gray mudguards. Add light gray printed tile to slopes as shown. Add dark pink angle plates to white 2x2 plate.

Step 3: Place dark gray mudguards on “chassis” as shown. Using the grabber, add black 1x1 plates with neon cones to black 1x2 tile with handle to form “fog lights”.

Step 4: Add steering wheel and white 1x2 tile w/panel to mudguards. Place fog lights on rear set of dark pink slopes. Add wheel assemblies to underside of white 2x8 plate.

Step 5: Add your minifigure driver and you’re ready to roll!