Lime Greenhouse Custom Building Kit Instructions

Above: LIME GREENHOUSE shown assembled with female minifigure.

LIME GREENHOUSE Custom Building Kit Instructions.

This posting provides images and directions to assemble the LIME GREENHOUSE custom building kit sold by BrickTrickDude exclusively on Ebay.

REMINDER: Enlarge the images by clicking on them.

Below: Parts included in the kit.

PARTS LIST

1 dark tan 6x8 plate
16 lime 1x1 bricks
12 lime 1x2 45-degree slopes
12 clear trans. 2x2 45-degree slopes
42 clear trans. 1x2 bricks
7 lime 1x2 smooth tiles
4 green stalks w/3 stems each
3 sprues of 4 red flowers
2 green trans. 1x1 cones
1 yellow 2x2 flower
1 orange 1x1 cap

Step 1: Begin by assembling all the components used to create the greenhouse.  Build 4 stacks of 3 clear transparent 2x2 slopes for the roof.  Create 4 stacks of 4 lime 1x1 bricks to serve as the columns at each corner of the greenhouse.  Remove red flowers from center sprues and place on green stems, stack stalks in 2 groups of two for bouquets.  Stack both green transparent 1x1 cones, add yellow 2x2 flower and top with the orange 1x1 cap to create the sunflower.  Build 9 stacks of 4 clear transparent 1x2 bricks.  Assemble the 2 “gable roof ends” by stacking 3 clear transparent 1x2 bricks as shown, and then add the lime 45-degree slopes.  Now you have all the components assembled to begin constructing the greenhouse.

Step 2: Begin by adding 3 stacks of clear 1x2 bricks and 2 stacks of lime 1x1 bricks to the dark tan 6x8 plate as shown to form the back wall of the greenhouse.  Then place one lime 1x2 tile on the dark tan plate as shown.

Step 3: Add the sunflower situated between four pegs at back of green plate as shown.

Step 4: Add the red flower bouquets to pegs on the green 6x8 plate as shown.

Step 5: Add 2 stacks of 1x2 clear bricks to each side of the dark tan 6x8 plate.

Step 6: Add remaining lime 1x1 columns and stacks of clear bricks to build front wall.

Step 7: Add one of the gable roof ends to the back wall of the greenhouse. 

Step 8: Carefully add the 4 stacks of clear slopes to build the greenhouse roof.

Step 9: Add the remaining gable roof end to the front wall of the greenhouse.

Step 10: Carefully add the lime 1x2 tiles to the roof; this will require a light touch.

Notes: Gripping the sides of the greenhouse when adding tiles on roof line eases application.

Above: LIME GREENHOUSE shown assembled with male minifigure.