PINK FOUR WHEELER • BUILDING INSTRUCTIONS

Above: The PINK FOUR WHEELER shown assembled complete with female minifigure ZELDA.

PINK FOUR WHEELER • BUILDING INSTRUCTIONS

Another in the series of BRICK TRICK DUDE custom building kits, fans of PINK will dig the PINK FOUR WHEELER and GAL PAL ZELDA. Following is a parts list as well as images and directions for building this kit, sold exclusively on Ebay. You can also use your own bricks and parts.

REMINDER: Enlarge the images by simply clicking on them.

Below: The PINK FOUR WHEELER from the rear view.

Below: Parts contained in the BRICK TRICK DUDE custom building kit.

PARTS LIST
2 red transparent 1x1x2/3 slopes
2 yellow transparent 1x1x2/3 slopes
1 white 1x2 smooth tile
1 dark purple 1x2 grill
2 dark pink 1x2x1x4 angle plates
4 dark gray 2x2 mudguard plates
4 large tread wide black tires on wide white rims
2 black 2x2 axle plates
4 dark pink 1x2 45-degree slopes
1 light gray 1x2 printed tile
1 white 1x2 tile w/panel
3 black 2x2 plates
1 black 1x2 tile w/handle
2 black 1x1 plates w/grabber
2 neon transparent 1x1 cones
1 black/white steering wheel
1 white 2x8 plate

Step 1: Place wheels on black axle plates. Add red transparent 1x1 slopes and white tile to dark pink angle plate; add yellow transparent slopes and grill to second dark pink angle plate. Put neon cones on black 1x1 plates.

Step 2: Place 3 black 2x2 plates on white 2x8 plate. Add dark pink 1x2 slopes to 2 dark gray mudguards. Add light gray printed tile to slopes as shown. Add dark pink angle plates to white 2x2 plate.

Step 3: Place dark gray mudguards on “chassis” as shown. Using the grabber, add black 1x1 plates with neon cones to black 1x2 tile with handle to form “fog lights”.

Step 4: Add steering wheel and white 1x2 tile w/panel to mudguards. Place fog lights on rear set of dark pink slopes. Add wheel assemblies to underside of white 2x8 plate.

Step 5: Add your minifigure driver and you’re ready to roll!

PINK ART GALLERY with SABRINA • BUILDING INSTRUCTIONS

Above: The PINK ART GALLERY custom building kit shown assembled complete with female minifigure SABRINA.

PINK ART GALLERY with SABRINA • BUILDING INSTRUCTIONS

This posting features images of the finished project and complete directions to build the PINK ART GALLERY from the BRICK TRICK DUDE kit sold on Ebay or using your own bricks and parts.

Below: Another view of the PINK ART GALLERY, which is designed in "doll house" style, meaning one side is left open for easy access and viewing.

Above: A close-up shot shoes female minifigure SABRINA next to a pedestal with a "crystal" sculpture. At right we can see the brick "painting" on the wall.

Below: A view of the exterior of the PINK ART GALLERY. The outside is landscaped with a PALM TREE and has a "glass" sculpture tower at the front entrance.

Above: The vantage point gives us a nice look at the "stained glass window" built into the gallery side "bump-out" wall.

PINK ART GALLERY with SABRINA • BUILDING INSTRUCTIONS begin here...

REMINDER: Enlarge the images by simply clicking on them.

Below: All of the parts included in the BRICK TRICK DUDE custom building kit sold exclusively on Ebay.

PARTS LIST
8 brown 1x1 bricks
6 lime 1x1 caps
3 black 2x2 bricks
2 black 1x2 tile w/single peg
2 medium blue trans. 1x1 caps
2 yellow transparent 1x1 caps
1 orange transparent 1x1 cone
1 red transparent 1x1 cone
3 lime 1x1 bricks
1 dark purple 1x1 brick
1 dark pink trans. 1x1 brick
1 bright pink 1x1 brick
1 pink glitter trans. 1x2 brick
1 blue 1x1 brick
1 orange 1x1 brick
1 green 1x1 brick
1 medium blue 1x1 brick
2 dark gray 2x4 plates
2 dark gray 6x6 plates
5 green 3x8 palm frond leaves
8 clear transparent 1x2 plates
4 lime 1x4 plates
1 white 2x2 plate
2 red 2x2 smooth tiles
23 green transparent 1x1 plates
30 clear transparent 1x2 bricks
4 black 1x2 bricks
2 black 1x1 bricks w/handle
16 dark pink 1x1 bricks
1 light gray 8x16 base plate
6 bright pink 2x4 bricks
8 dark pink 2x2 bricks
6 white 1x8 bricks

Minifigure GAL PAL “Sabrina” is assembled from:
1 black “page cut” wig
1 smiley head with eyebrows, red lipstick and alternate face
1 white floral torso
1 black hips/legs

Step 1: Begin by assembling all the elements for the structure as well as the artwork and landscaping. Form 4 stacks of 2 dark pink 1x1 bricks, which will be used as part of the clerestory/roof section. Create one stack of 6 dark pink 1x1 bricks, which will form part of the front entrance wall of the gallery building. Stack all six bright pink 2x4 bricks for use as one segment of a gallery wall. Stack all eight dark pink 2x2 bricks and add the white 2x2 plate to the bottom of the stack to build the wall column. Create 2 stacks of six clear transparent 1x2 bricks, which will be used as floor-to-ceiling windows in the gallery building. Create 3 stacks of 2 clear transparent 1x2 bricks for use as clerestory windows. Stack all six white 1x8 bricks, which will form the gallery building back wall.

REMINDER: Enlarge the images by simply clicking on them.

Step 2: Build the front door by stacking black 1x2 bricks and placing black 1x1 bricks with handles centered in stack;1 facing each direction. Add dark pink 1x1 bricks to top.

Step 3: Collect the various elements as shown above. These pieces are required to assemble the painting for use inside the gallery building.

Step 4: Stack 1x4 lime plates and various 1x1 and 1x2 bricks to form the painting. You can follow this guideline or create your own unique design.

Step 5: Build the “crystal” sculpture by stacking and rotating the 8 clear transparent 1x2 plates. Create the pedestal with black 2x2 bricks.

Step 6: Add black 1x2 tiles with pegs to the top of the pedestal. Place crystal sculpture on the two pegs on top of the 2 black tiles.

Step 7: Create the “glass art” for the front entry by stacking the transparent cones, caps and plates as shown; or any other way you like.

Step 8: Place glass tower sculpture between pegs on remaining black 2x2 brick, forming the exterior art and pedestal display.

Step 9: Build the palm tree by stacking brown 1x1 bricks. Snap fronds into a star shape and add lime 1x1 caps.

Step 10: Create 4 stacks of 3 green transparent 1x1 plates. Add 2 plates to each of 4 clear bricks.

Step 11: Build the “stained glass” window by stacking bricks and plates as shown.

Step 12: Shown above are all of the completed elements required to construct the gallery building and as well as the contents and exterior.

REMINDER: Enlarge the images by simply clicking on them.

Step 13: Add white 1x8 stack of bricks to base plate, forming back wall. Add stained glass and dark pink column creating bump-out sidewall. Place one stack of clear bricks for a window and add the stack of bright pink bricks to form remaining sidewall. Add the two dark gray 2x4 plates to form side roof section.

Step 14: Add door and second clear stack of 1x2 bricks, plus the stack of dark pink 1x1 bricks to build the front wall. Add two stacks of 2 clear bricks and two stacks of dark pink 1x1 bricks to dark gray 2x4 plates to begin clerestory roof.

Step 15: Attach one dark gray 6x6 plate to form the lower roof section as shown. Add remaining two stacks of two dark pink 1x1 bricks with clear 1x2 brick stack to complete the clerestory windows.

Step 16: Add second dark gray 6x6 plate to complete the roof.

Step 17: “Hang” the painting by attaching lime pegs on plate to underside of dark gray roof plates. Add sculpture on pedestal.

Step 18: Add the 2 red 2x2 smooth tiles for the walkway. Place palm tree and glass art tower. Now the gallery is ready for a gala opening party.

Below: The PINK ART GALLERY is complete and SABRINA is ready to show the artwork to your minifigure guests!

MAGENTA PINK FLOWER VENDOR KIOSK • BUILDING INSTRUCTIONS

Above: The MAGENTA PINK FLOWER VENDOR KIOSK shown assembled along with a blonde female minifigure, we named her Zoey.

MAGENTA PINK FLOWER VENDOR KIOSK • BUILDING INSTRUCTIONS

This posting features images, a parts list and directions to construct the MAGENTA PINK FLOWER VENDOR KIOSK. This custom building kit from BRICK TRICK DUDE is sold exclusively on Ebay.

UPDATE: September 2009. This kit is now available with a new female minifig as shown below.

Above: The MAGENTA PINK FLOWER VENDOR KIOSK shown assembled with female minifigure "Fern".

Below: Parts included in the kit.

PARTS LIST
1 sprue each of 4 red, white and dark pink flowers
4 green stalks w/3 stems each
10 green transparent 1x1 plates
4 dark pink 1x1 bricks
1 green bamboo leaf part
1 magenta 1x4x2 special curve brick with top peg
2 green transparent 1x1 cones
1 magenta 2x4 45-degree slope
1 lime 1x1 cap
1 yellow Belville® flower
1 orange 1x1 cap
1 dark pink transparent Belville® flower
1 bright green Belville® leaf
1 dark pink 1x1 cylinder
1 pink transparent glitter 1x1 brick
1 black/gray gear shift
3 medium blue transparent 1x1 caps
1 bright pink 2x4 brick
2 lime 4x4 plates

Step 1: Place flowers on stems. Stack dark pink 1x1 bricks alternating with green trans. 1x1 plates. Add green trans. plates to magenta slope. Stack blue caps, add gearshift. Snap bright pink 2x4 brick onto lime plates.

Step 2: Place orange cap on pink flower, add to bright green leaf part. Add lime cap to yellow flower, bamboo leaf and stack on green trans. cones. Add magenta curve brick to magenta slope and pink 1x1 stacks.


Step 3: Place kiosk assembly on to bright pink 2x4 brick. Add pink transparent flower “sign”. Place blue trans. caps with gearshift, (water pump bottle), on bright pink 2x4 brick.

Step 4: Add dark pink cylinder and pink glitter brick for use as “vases” on lime plates. Place yellow “sunflower”. Stack stems 2 up and add red, pink & white floral bouquets to vases.

PURPLE GO CART with COUNTDOWN LIGHT POLE • BUILDING INSTRUCTIONS

PURPLE GO CART with COUNTDOWN LIGHT POLE • BUILDING INSTRUCTIONS

This kit is available with a male minifig, BUSTER, or a female minifigure, BETSY.

Photos and instructions will publish here soon.

PALM TREE, LIME PLANTER & DOG WALKER BOY BUILDING KIT

Above: The PALM TREE, LIME FLOWER PLANTER & DOG WALKER BOY KIT shown assembled. This kit is also available with a female minifigure and a pink flower planter.

The PALM TREE, LIME FLOWER PLANTER & DOG WALKER BOY • BUILDING INSTRUCTIONS

This posting features instructions to build the custom BRICK TRICK DUDE kit as shown in the image(s) above and below.

Below: A close-up shows the male minifigure we named MAXWELL, included with this kit, (sold exclusively on Ebay).

Below: Parts included in the kit.

PARTS LIST
1 lime 4x4 plate
4 lime 1x1 bricks
4 white 1x2 profile bricks
6 white 1x2 smooth tiles
2 green stalks w/3 stems
2 red sprues of 4 flowers
6 lime 1x1 caps
1 green transparent 1x1 cone
8 brown 1x1 bricks
5 green 3x8 palm frond leaves
1 black rope with cap ends
1 brown minifigure dog

Step 1: Place flowers on stalks. Stack brown 1x1 bricks in an offset fashion as shown. Add lime 1x1 bricks to corners of lime 4x4 plate. Place green transparent cone on lime plate.

Step 2: Place the white 1x2 profile bricks on the lime 4x4 plate to create the perimeter of the planter. Assemble green palm fronds into a 5-pointed star pattern as shown.

Step 3: Add the white 1x2 smooth tiles to the planter perimeter. Add tree trunk. Stack flower stems, place on green cone. Add lime caps to pegs on palm fronds.

Step 4: Carefully place the palm frond assembly on to the stack of brown 1x1 bricks and your palm is complete. Add the black string with one end cap to peg on top of the minifig dog.

Step 5: Attach the “leash” to your minifigure dog walker GUY PAL. Now you are ready to add the PALM TREE PLANTER and DOG WALKER to your brick town!

PINK CONDO TOWER

Above: A front view of the PINK CONDO TOWER designed and built by BRICK TRICK artist Trick Richey.

PINK CONDO TOWER

This doll house style structure, (that means the back is left open for interior access and play), features seven full floors of space, including retail and apartment units. Designed in a grid-like or cubist format, the color scheme includes three shades of pink in contrast with glossy black bricks. Some units have balconies and pink transparent glitter brick windows. The building was constructed on a 16x32 peg base plate and stands about three feet tall. Two retail spaces and a lobby occupy the first floor. Floors 2 through 4 are divided into small apartments. Floor five is a large apartment, floor six is 2 smaller units and floor seven houses the penthouse.

REMINDER: Enlarge the images simply by clicking on them.

Below: The backside of the building which has been left completely open, often called "doll house" style.

Above: On the first floor one of two retail units is the FLORIST.

Below: The second retail establishment is a candy store and coffee bar. In this image you can also see the "lobby" which has a "crystal" overhead light fixture that really lights up via a small battery operated LED lamp.

Above: One of the condo units on the second floor is decorated in "powder blue".

Below: Another view of the powder blue furnished apartment. Note the PINK TRANSPARENT GLITTER BRICKS used in the small window, (at right in image).

Above: The third floor has an apartment decked out in modern white furnishings.

Below: The adjacent third floor unit features a pink interior color scheme.

Above: Apartments on the fourth floor. Notice the "painting" constructed of various colored grills placed randomly on a plate.

Below: In this shot you can see the third through fifth floors.

Above: On the fifth floor is a large apartment, in this shot the men are having a meeting which seems to require they keep their hats and helmets on.

Below: We can see into the PENTHOUSE on the seventh floor at the top of the building. CAMILLE, who you may recall from her car video, enjoys the view from the top along with her white kitty cat.

Above: Another view inside the PENTHOUSE. In the lower portion of this image you can also view the sixth floor, where one of the two units remains vacant.

Below: Another view inside the building interior floors from top to bottom.

Above: The PINK CONDO TOWER as seen from the right exterior side. The building has bright pink windows in some locations and also features DARK PINK BAY WINDOWS in two apartments. Balconies are located on floors 2, 4, 5, 6 and 7.

Below: The PINK CONDO TOWER viewed from the left. The roof features details such as the satellite dishes and vent stack. There is also another LED light hidden in the roof which illuminates the PENTHOUSE.