PURPLE & LIME QUAD BIKE • BUILDING INSTRUCTIONS

Above: The PURPLE and LIME QUAD BIKE shown assembled with a female minifigure.

PURPLE & LIME QUAD BIKE • BUILDING INSTRUCTIONS

This posting features images and direction to build the PURPLE & LIME QUAD BIKE designed by BRICK TRICK DUDE and sold exclusively on Ebay.

Below: Parts included in the BRICK TRICK DUDE custom building kit.

PARTS LIST
2 dark purple 1x2 grills
2 black 2x2 plates
2 dark purple 1x3 33-degree slopes
2 dark purple 1x2 3-sided slopes
1 gray printed 1x2 tile
1 black 1x2 plate w/handles
2 light gray 2x2 axle plates
1 black 2x4 plate
1 clear transparent 1x2 plate
2 lime 2x4 mudguard plates
4 yellow transparent caps
2 red transparent 1x2 grills
1 lime 1x4x2 angle plate
1 lime 1x4 plate
4 black tires on 4 gray rims
1 black 1x2 tile w/handle

Step 1: Place rims/tires on axle plates. Put gray printed 1x2 tile on black 1x2 plate with handles. Snap lime 2x4 mudguards on black 2x4 plate at each end on two pegs; add grills & slopes.

Step 2: Add black 2x2 plate and clear 1x2 plate to underside of chassis as shown. Place yellow transparent caps on lime 1x4 plate as shown.

Step 3: Add lime 1x4 to create front “bumper”. Place 2x2 black plate between lime mudguards. Add red transparent 1x2 grills to 1x4x2 lime angle plate to create taillights.

Step 4: Place both 1x3 33-degree slopes on front lime mudguard plate and over 2 remaining pegs of lime 1x4 plate. Add black 1x2 plate with handles and tile as shown.


Step 5: Add lime taillight assembly to rear mudguard and top with black tile/handle as shown in Step 4. Snap wheel assemblies to underside of chassis and add minifigure.

Above: PURPLE & LIME QUAD BIKE shown from another vantage point.